The Launch Pad Anubis Surface-to-Surface Missile Another original Launch Pad design. The Anubis model rocket kit was inspired by the Lacrosse missile and named after the ancient Egyptian god. For some high altitude flying, use the recommended motors : D12-3, D12-5, and E15-7. This is a skill level two kit, which makes it well suited for less experienced modelers. Its stylish fins and overall design make the Anubis a great sport flier. Priced to fit any budget.
		$14.99

Sunward Interplanetary Shuttle If you're looking for a model rocket that will fly on as many different motors as possible, the Interplanetary Shuttle may be the answer. It will provide fun and excitement with any of these : A8-3, A8-5, B4-2, B4-4, B6-2, B6-4, B6-6, C5-3, C6-3, C6-5, and C6-7. This futuristic skill level 2 kits is over 11" hight with a 5 1/4" wingspan. It can reach altitudes of 1,000 feet.
	$14.95

		Squirrel Works Red Baron The design for this boost glider was inspired by World War II biplanes. This unique style makes the Red Baron glider an immediate favorite at launches. The kit even comes with a selection of iron cross water-slide decals. You are in charge of the rocket's final appearance. Send it up on a A8-3, B4-2, B6-2 or B6-4 and watch it come gliding down. All balsa pieces are laser-cut. Once assembled, the Red Baron is 9.22" long with an impressive 9.25" wingspan. Squirrel Works lists the weight for this model as 0.5oz. Templates are included for accurate rudder placement.
		$14.95

Fliskits Stingray Even after numerous sightings, this remains a most mysterious craft. Are they warriors, or peaceful explorers? Nobody knows... Why not build one and decide for yourself? This futuristic, skill level 3, vessel features a 0.976" diameter with a length of 14.4". When going on missions, the Stingray prefers to be equipped with one of these model rocket motors : A8-3, B4-2, B6-4, and C6-5.
	$14.95

		Starlight Seiron 3 Get ready for some 3 engine clustering fun! That's right, the Seiron 3 flies on not 1, not 2, but 3 engines at once. For exciting clustering action, use three matching rocket motors : A6-4, A8-3, B6-6, & C6-7. This one really soars on 3 C6-7 engines. The rocket is over two foot tall (26.25"). Maximum airframe diameter : 1.65". Kit includes balsa nose cone, 3 pre-cut fins, parachute assembly, decals, and a balsa transition.
		$13.95

Fliskits Thing-a-ma-Jig This skill level 1 model rocket kit is great for beginners and younger rocketeers (including classroom settings). Building the kit in under 1 hour is possible. The fins are what makes this kit unique. They always come out straight and won't fall off while the glue is drying. These causes of frustration have been eliminated from the building process. The Thing-a-ma-Jig rocket will fly on a nice variety of motors : A8-3, B4-2, B6-4, and C6-5. This makes it a great flier for just about any size launch site. This model rocket is 21.24" tall and has a 0.976" diameter.
	$13.95

		Sunward Moondance Ready for a rocket that looks like a bat-like creature about to shoot off into the sky to howl at the moon? This kit includes quality parts such as laser-cut balsa, metal motor retaining clip, 18" parachute, self-adhesive decals. Excellent kit for beginners and new modelers. Recommended for rocketeers age 10 and up. Can be flown on many different motors : B6-2, B6-4, C5-3, C6-5, & C6-7. This makes is a great performer on different sized fields. The Moondance finished model stands 24 1/2" tall and has an airframe diameter of 1.3".
		$12.95

Starlight F-32 Avenger Futuristic spacecraft with sci-fi style design from the year 2078. Ready to defend our planet from alien invaders, the F-32 Avenger flies on A8-3, B6-4, or C6-5 rocket engines. Complete with laser cannons, this model rocket looks like a champ on the launch pad. Components include balsa fins and canards, decals, instructions, 12" parachute, and more. Fully assembled model is 14.75" long with a 1" body tube diameter.
	$12.95

		Squirrel Works Stinger This compact performer is 12.125" long with a 0.976" diameter. Good for exciting flights up to 1,400 feet on a C6-7! For smaller fields, and increased odds of recovery, other rocket engines can be used : 1/2A6-2, A6-4, A8-5, or a B6-6. The Stinger is easy to build, in part due to the Squirrel Works quality components : balsa nose cone, laser-cut fins, elastic shock cord, Mylar streamer and water-slide decals. Build your own and watch it "buzz" off the pad!
		$12.95

Fliskits D-Nelson Tomahawk Great overall flier with an interesting design, combining regular fins and tube fins. The pass-through ejection setup makes it so the Fliskits D-Nelson Tomahawk benefits from a larger main compartment for easy parachute packing. This skill level 2 model rocket flies on A8-3, B6-4, and C6-5 motors for varied levels of fun and excitement. An impressive 24.84" long, this model has a diameter going from 0.736" to 1.325". The fin span is 5.3".
	$12.95

		Starlight Sky Master Take a closer look a this sleek, two-stage, model rocket. A full 28.00" long, with a 1" diameter, the Sky Master is ready for some high-altitude flights. The rocket recovers on a parachute (12"), and comes complete with 6 balsa fins and decals. Recommended engines for the first stage are B6-0 and C6-0. For the second stage, either a A8-5, B6-6, or a C6-7 will do the trick.
		$11.95

Starlight Jay Hawk This is a scale version of the US Navy target drone. Its wing design make it stand out and give it that cool look. The Starlight Jay Hawk has a 1" diameter airframe and is 13 3/8" long. The kit includes decals, parachute and balsa fins. Recommended model rocket motors : A6-4, A8-3, B6-4, and C6-5
	$11.95

		Squirrel Works Space Ranger This sleek futuristic flying model rocket can reach altitudes over 1,500 feet. The craft measures 12.875" long with a body diameter of 0.736". Weight: 0.5 oz. This quality model rocket kit comes complete with laser cut fins, metallic mylar streamer, water-slide decals and a paper cockpit. Send the Space Ranger exploring on interplanetary missions (up to 1,500 feet) with any of the following model rocket motors : A6-4, A8-5, B6-6, C6-7.
		$11.95

Fliskits Avalear Rated as a skill level 1.5, the Fliskits Avalear is perfect for beginners who are ready to try something new. Not quite ready for a level 2 kit? Try one of the Avalear model rockets first. Try cutting your own fins from the included balsa fin stock. A fin alignment template is provided to assist you with aligning the fins correctly, without hassle and frustration. The Fliskits Avalear hobby rocket was the commemorative kit for the 2008 NEMROC rocketry gathering. The airplane-style wings make for cool flights, as it appears to glide a little, before the parachute pops out. Recommended Estes engines : 1/2A6-2, A8-3, B4-4, B6-4, and C6-5. Please note that the Avalear rocket kit does not include decals. Simply use your creativity and paint it as shown in the picture, or design your own unique look.
	$11.95

		Sunward Box Racer This skill level 2 model rocket will fly up to 500 feet and recovers with a parachute. It measures over 19" long and has a 0.976" body tube diameter. The side panels (aka fins) are made from foam board. They come complete with pre-printed side panels. This makes for quick and easy detailing. The Box Racer will gladly speed off on any of these model rocket motors : B4-2, B6-4, & C6-3. This Sunward Aerospace kit is easy enough for beginners to build and launch. More seasoned builders will enjoy the unique design.
		$9.95

Starlight Apogee Great choice as a first rocket to get started with the hobby. Model comes with balsa fins. This model rocket has a 1" diameter is and 11" long. A 12" parachute is included for recovery. Decals are included with the kit. Fly the Starlight Apogee on any of these motors : A8-3, B6-4, & C6-5. This motor selection makes it a good flier for launch sites of different sizes. Great kit for youth groups. Use it for fun flying or to get that Aerospace merit badge. See bulk pricing for the best deal.
	$9.95

		Starlight Asteroid Probe The Asteroid Probe is a futuristic lander craft deployed for mining on asteroids. Measurement from tip of nose cone to bottom of fin : 10.5". Diameter of the body tube : 1.65". The Asteroid Probe uses parachute recovery (Mylar). Kit comes complete with decals shown in the picture. Recommended model rocket engines for this skill level two kit : A8-3, B6-4, and C6-5.
		$9.95

Starlight Whiplash 2 Reach up to 2,500 feet with this two-stage beauty. Because of these extreme altitudes, the Whiplash 2 uses streamer recovery to try and make it land closer. The first stage can use a B6-0 or C6-0 engine. The second stage can benefits from a nice selection for varying altitudes : A8-3, B6-6, or a C6-7. The kit includes parts to build both stages of the model rocket. Fully assembled, the Starlight Whiplash 2 is 14.00" long (0.75" diameter).
	$9.95

		Squirrel Works X-RV This futuristic glider is 7.23" long, has a 7.125" wingspan and weighs in around 0.6 oz. Great model rocket for smaller fields. The body and fins are formed from pre-printed sheets of cardstock. A professional looking model that is easy to build! Recommended motors for the X-RV : B4-2, B6-2, C6-3.
		$9.95

Sunward Space Speedster This futuristic model uses foam board as fins. It comes complete with pre-printed panels to cover the fins for immediate, no-effort, detailing. This makes for a cool looking rocket without having to worry about paint. The Sunward Space Speedster will fly on this selection of model rocket motors : B4-2, B6-4, C6-5. For the maiden voyage, the B6-4 is the recommended motor. The detailed instructions make this skill level 2 kit easy to build. You'll have her speeding around in no time.
	$8.95

		Starlight Saber This tube fin rocket comes complete with payload bay. Ready to transport cargo at your command. This skill level one kit is easy enough to build, even the tube fins are a breeze. The finished model measures 18.25" in length, with a 1" diameter. Recommended rocket engines for the Starlight Saber : A8-3, B6-4, & C6-5. The Saber kit includes a 12" Mylar parachute and decal.
		$8.95

Starlight Queeze-Bee Now here's an interesting concept. The three balsa fins have spin tabs that will send this model rocket spiraling into the sky. Watch the Queeze-Bee lift off and produce a cork-screw shaped smoke trail. The model will do this with any of the recommended rocket engines : A8-3, B6-4, & C6-5. The Queeze-Bee is skill level 1 kit and is a foot long when finished. It has a 1" diameter body tube.
	$8.95

		Starlight Super Tiger A visitor from the future! The year is 2078 and this futuristic craft is on patrol. Add one to your fleet and help keep an eye on things in the galaxy. The completed model rocket is a total of 12.5" long with a 1" airframe diameter. The Super Tiger goes off to explore on these model rocket engines : A8-3, B6-4, and C6-5. Parts for this flying model rocket kit include : balsa fins, parachute, and decals.
		$8.95

Micro Maxx Fliskits Mudwasp The tube and fin design give the Mudwasp a unique and exciting look. As a bonus, it actually makes assembly easier. Note, however, that we are talking small parts, which can offer a unique challenged enjoyed by MMX modelers. The finished rocket is 7.92" long with a 3.32" finspan. This is a skill level 1 model rocket. The Fliskits Mudwasp requires Quest Micro Maxx Motors to launch (MMX I or MMX II).
	$8.55

Fliskits Micro Maxx Interloper The many details make this futuristic intelligence gathering craft a pleasure to build and fly. Complete model rocket kit with laser cut fiber ram-jet fins, mylar streamer, water-slide decals, and wooden nose cone. Just over 6" long, 2.03" finspan. The Fliskits interloper is a skill level 2.5 kit, intended for modelers with Micro Maxx experience. Recommended motor : Quest Aerospace MMX II
	$8.45

ASP Micro WAC Corporal While the model has both booster (Tiny Tim) and sustainer stages, it is a single stage rocket. The two parts are glued together. To launch, use Quest TM Micro Maxx motors only, no other motors will fit. This ASP kit is assembled from small pieces and is not for beginners. The kit includes decals, detailed instructions, and streamer. Scale for this ASP hobby rocketry kit is 1:42.7.
	$7.50

		ASP Micro Jayhawk This model rocket kit only flies on Quest Micro Maxx motors. The same is applies to other MMX rockets offered for sale here. This small rocket measures 3.75" long with a 0.282" body diameter. It weighs a mere 0.23 oz. As it is so light, The MMX JayHawk rocket simply pops the nose cone at apogee and comes tumbling down. No parachute or streamer needed.
		$7.50

Edmonds Tinee This is an excellent rocket glider kit for beginners. Even novices can assemble one in less than 30 minutes. It needs to adjustments of balance weight. Simply assembly and fly. Good, low cost, choice for scout troops and students. The Edmonds Tinee glider flies on 1/2A3-2T or A3-4T model rocket engines. This keeps the cost per flight low.
	$6.99

		ASP Micro Hawk This is the micro scale version of the popular Hawk anti-aircraft missile. A total of 4.13" long, the Micro Hawk flies readily on Quest Micro Maxx engines. Don't let their size fool you, these flying model rockets can be great fun. This is especially the case when flying from a small field. Includes Kevlar shock cord, water-slide decals, and metallized streamer. The small size of the parts can make assembly a challenge. This toy rocket is not suited for younger modelers.
		$5.99

ASP Micro Sonda II B The Sonda II B sounding rocket first launched in the 70's and is still in use today. It was developed in Brazil. Flies on Quest MMX rocket engines and uses the included streamer for recovery. The finished model rocket is 5.38" long. Diameter: 0.282". Approximate weight : 0.11 oz. Lots of fun when flying on smaller fields. Keep your eyes on this one, the Micro Sonda II B jumps off the launch pad for exciting flights.
	$4.99

		Starlight Nano Excellent low-cost, and easy-to-build, kit for scouts, 4-H clubs, and schools. The balsa fins are pre-cut. Decals and streamer are included with this sport rocket. The streamer recovery method is well suited for smaller launch areas. Watch the Nano take to the skies with these recommended rocket engines: 1/2A6-2, A8-3, B6-4, C6-5, and C6-7. This is a economical way for scouts, 4-H clubs, and schools to take part in model rocketry. Check the bulk pack pricing.
		$4.95

Squirrel Works Pie in the Sky Now this is what I call an oddroc... Send a pizza pie to the sky. Yes, it really flies, and uses tumble recovery on the way down. The disc is laser-cut plywood. The peel-and-stick decal covers the entire top of the model. It doesn't take an artists to make this pizza pie look tasty. The Pie In The Sky flies on B6-0 and C6-0 model rocket engines. This saucer-style oddroc rocket is quick and easy to build.
	$4.95