Saturn 1B 1:282 This is a 1:282 peanut scale model kit of the infamous Saturn 1B NASA vehicle. The NASA vehicle was used to test parts of the Apollo moon mission in the 60's. The finished Saturn 1B model is 9.316" tall and has a 0.976" diameter. It offers excellent levels of detail, often not seen in larger models. This scale model rocket kit has a unique feature. It lets you, the builder, decide what skill level the kit is. You can build it as a skill level 3 kit. If you need more of a challenge, you can make it a skill level 4, or even level 5 model. The instructions are written in a way that allows the modeler to set the skill level for this model rocket kit. You're in control. Recommended engines : 1/2A3-4T, A3-4T, A10-3T. These are the popular 13mm motors which enable the Fliskits Saturn 1B kit to enjoy many, cheap, flights. This Fliskits rocket kit includes a parachute, and silk-screened decals. While the kit includes a launch lug, the rocket can also be flown with a pop lug or piston launcher (neither are included). This is the same design that was used by Jay Marsh to secure a first place at the national NARAM rocketry event in the 90's.
		$23.95

Thunderbird This is a flying sport scale model of the Thunderbird anti-aircraft missile. It is approximately 1:14 scale, it is not an exact replica. The real missile was created by the British Army and was nicknamed the Bloodhound System. It was in use from the late 50's to the mid 70's. It was known to be a highly accurate and lethal weapons system. This rocket kit includes balsa fin stock with fin templates, and paterns to form the booster nose cones from paper. This Flis rocket kit is intended for more experienced modelers. The finished Fliskits Thunderbird is 27.48" tall and has a 1.637" diameter. Fin span is an impressive 7.62". Listed weight is 1.9 oz. Parachute include for safe recovery. Model rocket engines to use with this kit are : Estes B6-4 and Estes C6-5.
	$23.95

		Nantucket Sound An original design and 24mm motors make the Fliskits Nantucket Sound a great additional to any rocket fleet. This odd-roc was originally designed to be a commemorative kit for the NARCON 2009 rocketry event. This flying lighthouse stands 9.316" tall with a 0.976" airframe diameter. The Fliskits face card shows the weight as 1.01 oz. Recommended engines are the Estes C11-3, D12-3, and for even more excitement, the E9-4. This makes for a great motor selection for the Nantucket Sound rocket kit. Note that it will deploy a bit late with the E9-4, use at your own risk. Plastic parachute included for recovery. A paper nose cone is used to keep this flying model rocket kit cheap enough for all to enjoy.
		$20.95

Fliskits Thing-a-ma-Jig This skill level 1 model rocket kit is great for beginners and younger rocketeers (including classroom settings). Building the kit in under 1 hour is possible. The fins are what makes this kit unique. They always come out straight and won't fall off while the glue is drying. These causes of frustration have been eliminated from the building process. The Thing-a-ma-Jig rocket will fly on a nice variety of motors : A8-3, B4-2, B6-4, and C6-5. This makes it a great flier for just about any size launch site. This model rocket is 21.24" tall and has a 0.976" diameter.
	$13.95

		Rhino Excellent kit for new modelers. Laser cut fins and detailed instructions make it a good first kit to build. Instructions for the Rhino model rocket kit even include hints and tips, specifically for beginners. This larger Flis model (24.5" long, 1.637" diameter, 10.5" fin span) makes for dramatic, slow takeoffs. Great for smaller launch fields. Flies on B4-2, B6-2, and C6-5. Balsa nose cone. Parachute recovery. Well suited for educational/classroom setting.
		$15.95

More Fliskits Rocket Kits : 1 2 3 4 5