These are the newest rockets for sale on this web site. Rocketarium.com is always developing and testing new model rockets. Once ready for sale, the new kits are showcased here.

		Frangible ARCAS Hobby Rocket During the 1960's, the Frangible ARCAS was developed as a rocket that could be flown over residential areas. To avoid damage to property, or injury, upon landing, the rocket was destroyed in mid-air. It has a sheet of explosive material wrapped around the airframe. Once the explosive was triggered, the rocket was reduced to particle sizes with acceptable levels of kinetic impact energy. The scale Frangible ARCAS model separates at motor ejection and descends under a parachute. The kit doesn't get blown to pieces and can enjoy many flights, as opposed to the real deal. Dimensions Overall length : Just over 3 foot (36.50") Diameter : 1.637" (BT60) Fin Span : 4.647" Weight : 4.4oz Recommended Engines Estes® D12-5 Single Use Aerotech® E20-7 Reloadable Aerotech® E18-7, E28-7, F24-7
		$26.95

Hexagon Oddroc Rocket Kit The Hexagon rocket kit has seven (7) plywood pieces. They make up the top, bottom, and internal support structure. The oddroc's side panels are formed from card stock. Templates are included. The flying Hexagon is a great rocket for smaller launch sites and uses drag recovery. Dimensions Diameter : 6.5" Weight : 1.7oz Recommended Motors Estes® C11-0, C11-3, D12-0, D11-P, D12-3, E9-4 Single Use Aerotech® E15-4, E30-4, F32-4 Aerotech® D9-4, D15-4, E18-4, E28-4, F12-3, F24-4
	$16.95

		Lunar Bug Rocket The Lunar Bug represents a future science craft on a mission to establish a manned base on the moon. While the model rocket won't quite make it to the moon, the Lunar bug flies on A to C motors for varying altitudes. Model rocket engines not included with the kit. The Lunar Bug is easy to build. It is a good choice for kids, or modelers with little experience. Parts include plastic nose cone, cardboard body tube, plywood centering rings, pre-cut balsa wood fins. The rocket kit comes complete with parachute for recovery. Dimensions Overall length : 17" Diameter : 1.637" (BT60) Fin Span : 2.44" Weight : 2.15oz Recommended Rocket Engines Estes® A8-3, B4-4, B6-4, C6-5
		$19.95

Mega Vortico Rocket Kit These oddrocs fly straight up while spinning. Then, these oddrocs helicopter down, for a smooth landing. If you're looking to mix up your rocket fleet, take the Mega Vortico for a spin. This oddroc kit comes with seven (7) pieces of pre-cut lightweight plywood. Launch lug and motor tube are also included. Fully illustrated instructions make assembly a breeze. Painting the rocket is optional. Dimensions Diameter : 7.5" Weight : 0.85oz Recommended Motors Estes® C11-0, C11-3, D12-0, D11-P, D12-3, E9-4 Single Use Aerotech® E15-4, E30-4, F32-4 Reloadable Aerotech® D9-4, D15-4, E18-4, E28-4, F12-3, F24-4
	$14.95

		Neptune Model Rocket Summon the powers of the oceans and make a splash in the sky! As a skill level 1 kit, the Neptune rocket is easy to build. The balsa wood fins are pre-cut. Great as a first rocket, or for young rocketeers with limited to no experience. Use an A or B rocket engine for easy recovery, or get brave with a C motor. Engines are not included with the kit. The Neptune hobby rocket comes complete with parachute for recovery. The Neptune kit includes instructions and parts required to build one model rocket. Dimensions Overall length : 18" Diameter : 1.637" (BT60) Fin Span : 5.84" Weight : 2.10oz Recommended Rocket Engines Estes® A8-3, B4-4, B6-4, C6-5
		$19.95

Octagon Oddroc Model Rocket This versatile rocket flies on a wide variety of motors and lands close to the pad. This oddroc will happily fly and recover on a small launch site. The Octagon is constructed from seven pre-cut plywood pieces. The plywood parts provide the strength for the model where it matters. The side panels are formed from card stock templates. Dimensions Diameter : 5.5" Weight : 1.2oz Recommended Motors Estes® A8-0, A8-3, B4-2, B6-0, B6-2, C6-0,C6-3 Single Use Aerotech® D10-3, D21-4 Reloadable Aerotech® D13-4, D24-4
	$14.95

		Vortico Oddroc Rocket Looking for something different? Give this oddroc a whirl! The Vortico shoots straight up into the sky and starts spinning. That motion results in helicoptering on the way down for a smooth landing. This oddroc consists of seven pre-cut plywood pieces, motor tube, and launch lug. The clearly illustrationed instructions make the Vortico rocket easy to assemble. The Vortico doesn't land far from where it took off. This is a great rocket for launch sites with small recovery area. Dimensions Diameter : 6" Weight : 0.55oz Recommended Motors Estes® A8-0, B6-0, C6-0,C6-3
		$12.95