Payload & Altimeter Bays

Bulkheads
Payload bays block off the air flowing through the tube, protecting the delicate payload from the heat of the ejection charge. Electronic bays are made to keep deployment and tracking devices and allow easy access to the content of the bay. A typical scenario where you need to use the altimeter bay is a dual-deployment rocket.


Back to Build Supplies
   

1.9" Payload Bay

1.9" Payload Bay

1.9" Airframe Payload Kit. Extend your 1.9" kit with this payload section. Includes: 9" long x 1.9" diameter white airframe, Coupler, Bulk Plate and Eyebolt Set.
$8.00

Add to Cart


2.2" Payload Bay

2.2" Payload Bay

2.2" Airframe Payload Kit. Extend your 2.2" kit with this payload section. Includes: 10" long x 2.2" diameter white airframe, Coupler, Bulk Plate and Eyebolt Set.
$7.00

... more info




2.6" Payload Bay with Welded Eyebolt

2.6" Payload Bay with Welded Eyebolt

Standard 2.6" Airframe Payload Kit. Extend your 2.6" kit with this payload section. Includes: 12" long x 2.6" diameter white airframe, 2.6 Coupler, 1/4" Bulk Plate and Welded Stainless Eyebolt Set.
$9.00

... more info




3" Payload Bay

3" Payload Bay

Standard 3" Airframe Payload Kit. Extend your 3" kit with this payload section. Includes: 12" long x 3" diameter white airframe, 6" Coupler, Bulk Plate and Eyebolt Set.
$9.00

... more info




4" Payload Bay

4" Payload Bay

Standard 4" Airframe Payload Kit. Extend your 4" kit with this payload section. Includes: 11" long x 4" diameter white airframe, 8" Coupler, Bulk Plate and Eyebolt Set.
$12.00

... more info




2.6" Altimeter Bay

2.6" Altimeter Bay

This Altimeter Bay Coupler fits inside Standard 2.6" Airframe. This kit for housing deployment and tracking electronics includes the tubes, plywood bulkheads, a plywood mounting sled, nuts, washers, lock washers, eyelets, and threaded rods. Below is one of possible configurations where this bay can...
$29.95

... more info




4" Removable Altimeter Bay

4" Removable Altimeter Bay

This Removable Altimeter Bay Coupler fits inside Standard 4" Airframe. This kit for housing deployment and tracking electronics includes the tubes, 1/4" plywood bulkheads, a plywood mounting sled, nuts, washers, lock washers, eyelets, airframe wwitch band plastic rivets, and threaded rods. This...
$38.95

... more info




2.6" Switch Band for Altimeter Bay

1" Switch Band for Altimeter Bays. White Paper O.D.: 2.64. I.D.: 2.558, Thickness: 0.04
$1.45

Add to Cart


<