ASP Kappa-9M The Kappa series was a Japanese sounding rocket series. The first flight was in November 1962. The project developed into the Lambda and Mu satellite launchers. A big scale model rocket, the ASP Kappa-9M is over 3 1/2 feet long (43.25"). That should draw attention at just about any launch. Model diameter: 1.637". Weight : 4.06 oz. Scale is 1:10.1 The Kappa 9M model rocket requires a 3/16" launch rod and one of these engines : Estes C11-3, D12-5, E9-4, E9-6, or Aerotech composite E15-7 or E30-7. Includes parachute recovery device.
		$32.95

Dr Zooch Rockets Mark II Unlikely the other Dr Zooch flying rocket kits, this isn't a scale model of an existing vehicle. It does have that unique space program look and feel. The Dr Zooch Mark II model rocket stands 12.2" tall and has a 2.93" fin span. Weight without motor should be around 2.4 oz. This is one of the easier-to-build Dr Zooch kits, so if you're looking for a first model kit with space program style, the Mark II may be just be a good first kit to buy. Complete with payload bay for cargo, the Mark II flies on 18mm motors, such as the Estes B6-4. Plastic parachute included for recovery.
	$23.95

		Dr Zooch Rockets Jupiter C This is a scale model of the rocket used to launch the first US satellite, as part of the space race. The vehicle was known as the Explorer I, and the rocket was a slightly modified version of the Jupiter C, which some would call the Juno I. The completed Dr Zooch Jupiter C model rocket is about 12" tall. It is one of the easier Dr Zooch kits to build and a great overall flier. The Jupiter C kit is a single-stage flying model rocket which comes complete with balsa fin stock, pre-printed wraps, and plastic parachute. The shock cord setup is a combination of Kevlar and elastic. Recommended engines are Estes or Quest A, B or C. Flights to over 1,400 ft are possible with a C6-7.
		$23.95

Sunward Penguin Model Rocket Kit This fun rocket kit is BT80 based (2.6" diameter) and is 11 1/2" tall. The Sunward Penguin is a great stubby rocket. Includes 18" parachute, laser-cut balsa fins, lite-ply mounting rings, and a balsa nose cone. Skill level two kit. Who says penguins can't fly? This penguin rocket can put on quite the show with these engines : C11-3, C11-5, D12-3, D12-5, and D12-7.
	$22.49

		The Launch Pad Dragonfly This skill level two model rocket is a Launch Pad original design, not one of their usual military scale kits. The Dragonfly still boasts the stylish looks of a missile and readily reports for duty on these Estes & Aerotech rocket motors : D12-3, D12-5, E15-7 & F24-7. The finished mid-power Dragonfly rocket is 26.5" long with a 1.6" body diameter (BT-60). An 18" Mylar parachute is included with the kit for recovery.
		$21.99

The Launch Pad Lance MGM-52 Tactical Battlefield Missile As a successor of the Honest John, the Lance MGM-52 was capable of delivering a variety of payloads at high speed and with considerable precision. The Launch Pad Lance model rocket is a skill level 2 kit and measures 28.75" tall (2.6" diameter). It flies on these Estes and Aerotech 24mm motors : D12-5, D12-7, E15-7 & F24-4. The "U.S. Army" decal seen in the picture is not included with this model rocket kit.
	$21.99

		ASP WAC Corporal This is a 1:9 scale model of the USA's first sounding rocket, the Wac Corporal. It was a liquid-fuel rocket and was first launched in 1945. Fly it on any of these model rocket engines for serious fun : Estes C11-5, D12-7, E9-6, E9-8, or Aerotech E15-7 and E30-7. With an adapter (not included) the WAC Corporal model rocket can also fly on the B4-2, B4-4, B6-4, and C6-5. That's a lot of motor choices for one kit. The finished kit measures 21.875" long, airframe diameter is 1.325", weight : 2.77 oz. Includes parachute for recovery.
		$21.95

Fliskits Nantucket Sound An original design and 24mm motors make the Fliskits Nantucket Sound a great additional to any rocket fleet. This odd-roc was originally designed to be a commemorative kit for the NARCON 2009 rocketry event. This flying lighthouse stands 9.316" tall with a 0.976" airframe diameter. The Fliskits face card shows the weight as 1.01 oz. Recommended engines are the Estes C11-3, D12-3, and for even more excitement, the E9-4. This makes for a great motor selection for the Nantucket Sound rocket kit. Note that it will deploy a bit late with the E9-4, use at your own risk. Plastic parachute included for recovery. A paper nose cone is used to keep this flying model rocket kit cheap enough for all to enjoy.
	$20.95

		Fliskits Shadowlord Take but one look at this hobby rocket and you'll know the Fliskits Shadowlord is ready for major excitement. Fly the Shadowlord on a C11 for smaller fields, or go crazy with an F motor for serious fun and entertainment. If you're new to 24mm motors, this kit offers a great way to start slowly with a C11 and work your way up to an F24, when ready. All recommended rocket motors : Estes C11-5, D12-5, E9-6 and Aerotech D15-5, E15-6, F24-7. Requires a 3/16" launch rod, motors are friction-fit. Includes water-slide decals and parachute. This model rocket stands 24.12" tall, and has a 1.325" body tube diameter. Fin span : 7.32", weight : 2.62 oz.
		$18.95

Squirrel Works Callisto The Callisto has a transition, which gives it that unique sixties-style space program look. Send this rocket off to explore with any of these Squirrel Works recommended engines : A6-4, A8-3, B6-4, B6-6, C6-5, or a C6-7. When fully assembled, the Callisto is 16 7/8" tall with a 1.325" diameter. The face-card lists the weight as 1.6 oz. This flying model rocket kit comes complete with a balsa transition, nose cone, and laser-cut fins. The kit includes a Mylar parachute for recovery. Also included are water-slide decals to help finish the model. Buy one today and add a classic-looking kit to your collection.
	$17.95

		Fliskits Frick-n-Frack This is an excellent two-stage rocket for smaller fields. It stages at around 40-50 feet and the rocket stays under 100 feet during the entire flight. Before launch, it looks like a regular six-sided saucer on the launch pad. Once airborne it surprises onlookers as it stages. The included assembly jigs and detailed instructions help greatly with assembly of the saucers. Recommended model rocket engines are : B6-0 & C6-0. The Fliskits Frick-n-Frack is 5.5" long, has a 0.736" diameter with a 10.24" fin span.
		$16.95

Fliskits HERC-5 Explore the galaxy in style aboard this futuristic recreational craft. Fliskits design at its best. If you like details, you'll love the full sheet of water decals to decorate this bird. Combined with this rocket's unique shape, they complete the Fliskits "Hobbicron Empire Recreational Craft 5". This futuristic model is nearly two feet tall (21.08") with a 0.736" diameter. Skill level 2 kit with a few fun challenges. The Fliskits HERC-5 isn't picky about motors either, a B4-2, B6-4, or C6-5 will do nicely.
	$16.95

		The Launch Pad Bolo This is a Launch Pad design, not based on any actual missile. The TLP Bolo has all the style of an artillery rocket, capable of carrying an impressive warhead. As a skill level 2 kit, it is a great introduction to The Launch Pad for beginning modelers. The Bolo model rocket kit is 27.25" long with a 1.6" diameter (BT-60). It flies on a nice selection of 24mm motors, including the D12-3, D12-5, E15-7, E30-7, and RMS E18-7 & F24-7.
		$15.99

Squirrel Works Jarrod Frankum's High 5 This is the 3rd member of the Signature Series family of Squirrel Works flying model rocket kits. Originally designed by Jarod Frankum as part of the NSL 2006 rocketry event. The High 5 model rocket kit includes hand-shaped laser-cut fins, balsa nose cone, colorful waterslide decals, and a Mylar streamer for recovery. Recommended rocket motors are : A8-3, B4-4, B6-4, C6-5 The Jarrod Frankum's High 5 stands 14.45" tall, and has a 1.325" body diameter. Clearly a fun kit that will be an instant favorite for rocketeers of all ages. This flying model rocket kit is recommended for modelers age 10 and up, with adult supervision for those under age 12.
	$15.95

		The Launch Pad Anubis Surface-to-Surface Missile Another original Launch Pad design. The Anubis model rocket kit was inspired by the Lacrosse missile and named after the ancient Egyptian god. For some high altitude flying, use the recommended motors : D12-3, D12-5, and E15-7. This is a skill level two kit, which makes it well suited for less experienced modelers. Its stylish fins and overall design make the Anubis a great sport flier. Priced to fit any budget.
		$14.99

Sunward Interplanetary Shuttle If you're looking for a model rocket that will fly on as many different motors as possible, the Interplanetary Shuttle may be the answer. It will provide fun and excitement with any of these : A8-3, A8-5, B4-2, B4-4, B6-2, B6-4, B6-6, C5-3, C6-3, C6-5, and C6-7. This futuristic skill level 2 kits is over 11" hight with a 5 1/4" wingspan. It can reach altitudes of 1,000 feet.
	$14.95

		Sunward Moondance Ready for a rocket that looks like a bat-like creature about to shoot off into the sky to howl at the moon? This kit includes quality parts such as laser-cut balsa, metal motor retaining clip, 18" parachute, self-adhesive decals. Excellent kit for beginners and new modelers. Recommended for rocketeers age 10 and up. Can be flown on many different motors : B6-2, B6-4, C5-3, C6-5, & C6-7. This makes is a great performer on different sized fields. The Moondance finished model stands 24 1/2" tall and has an airframe diameter of 1.3".
		$12.95

Fliskits D-Nelson Tomahawk Great overall flier with an interesting design, combining regular fins and tube fins. The pass-through ejection setup makes it so the Fliskits D-Nelson Tomahawk benefits from a larger main compartment for easy parachute packing. This skill level 2 model rocket flies on A8-3, B6-4, and C6-5 motors for varied levels of fun and excitement. An impressive 24.84" long, this model has a diameter going from 0.736" to 1.325". The fin span is 5.3".
	$12.95

		Starlight Jay Hawk This is a scale version of the US Navy target drone. Its wing design make it stand out and give it that cool look. The Starlight Jay Hawk has a 1" diameter airframe and is 13 3/8" long. The kit includes decals, parachute and balsa fins. Recommended model rocket motors : A6-4, A8-3, B6-4, and C6-5
		$11.95

Fliskits Avalear Rated as a skill level 1.5, the Fliskits Avalear is perfect for beginners who are ready to try something new. Not quite ready for a level 2 kit? Try one of the Avalear model rockets first. Try cutting your own fins from the included balsa fin stock. A fin alignment template is provided to assist you with aligning the fins correctly, without hassle and frustration. The Fliskits Avalear hobby rocket was the commemorative kit for the 2008 NEMROC rocketry gathering. The airplane-style wings make for cool flights, as it appears to glide a little, before the parachute pops out. Recommended Estes engines : 1/2A6-2, A8-3, B4-4, B6-4, and C6-5. Please note that the Avalear rocket kit does not include decals. Simply use your creativity and paint it as shown in the picture, or design your own unique look.
	$11.95

		Sunward Box Racer This skill level 2 model rocket will fly up to 500 feet and recovers with a parachute. It measures over 19" long and has a 0.976" body tube diameter. The side panels (aka fins) are made from foam board. They come complete with pre-printed side panels. This makes for quick and easy detailing. The Box Racer will gladly speed off on any of these model rocket motors : B4-2, B6-4, & C6-3. This Sunward Aerospace kit is easy enough for beginners to build and launch. More seasoned builders will enjoy the unique design.
		$9.95

Starlight Asteroid Probe The Asteroid Probe is a futuristic lander craft deployed for mining on asteroids. Measurement from tip of nose cone to bottom of fin : 10.5". Diameter of the body tube : 1.65". The Asteroid Probe uses parachute recovery (Mylar). Kit comes complete with decals shown in the picture. Recommended model rocket engines for this skill level two kit : A8-3, B6-4, and C6-5.
	$9.95

		Starlight Whiplash 2 Reach up to 2,500 feet with this two-stage beauty. Because of these extreme altitudes, the Whiplash 2 uses streamer recovery to try and make it land closer. The first stage can use a B6-0 or C6-0 engine. The second stage can benefits from a nice selection for varying altitudes : A8-3, B6-6, or a C6-7. The kit includes parts to build both stages of the model rocket. Fully assembled, the Starlight Whiplash 2 is 14.00" long (0.75" diameter).
		$9.95

Sunward Space Speedster This futuristic model uses foam board as fins. It comes complete with pre-printed panels to cover the fins for immediate, no-effort, detailing. This makes for a cool looking rocket without having to worry about paint. The Sunward Space Speedster will fly on this selection of model rocket motors : B4-2, B6-4, C6-5. For the maiden voyage, the B6-4 is the recommended motor. The detailed instructions make this skill level 2 kit easy to build. You'll have her speeding around in no time.
	$8.95

		Starlight Super Tiger A visitor from the future! The year is 2078 and this futuristic craft is on patrol. Add one to your fleet and help keep an eye on things in the galaxy. The completed model rocket is a total of 12.5" long with a 1" airframe diameter. The Super Tiger goes off to explore on these model rocket engines : A8-3, B6-4, and C6-5. Parts for this flying model rocket kit include : balsa fins, parachute, and decals.
		$8.95

Fliskits Micro Maxx Interloper The many details make this futuristic intelligence gathering craft a pleasure to build and fly. Complete model rocket kit with laser cut fiber ram-jet fins, mylar streamer, water-slide decals, and wooden nose cone. Just over 6" long, 2.03" finspan. The Fliskits interloper is a skill level 2.5 kit, intended for modelers with Micro Maxx experience. Recommended motor : Quest Aerospace MMX II
	$8.45

		ASP Micro WAC Corporal While the model has both booster (Tiny Tim) and sustainer stages, it is a single stage rocket. The two parts are glued together. To launch, use Quest TM Micro Maxx motors only, no other motors will fit. This ASP kit is assembled from small pieces and is not for beginners. The kit includes decals, detailed instructions, and streamer. Scale for this ASP hobby rocketry kit is 1:42.7.
		$7.50

ASP Micro Jayhawk This model rocket kit only flies on Quest Micro Maxx motors. The same is applies to other MMX rockets offered for sale here. This small rocket measures 3.75" long with a 0.282" body diameter. It weighs a mere 0.23 oz. As it is so light, The MMX JayHawk rocket simply pops the nose cone at apogee and comes tumbling down. No parachute or streamer needed.
	$7.50

		ASP Micro Hawk This is the micro scale version of the popular Hawk anti-aircraft missile. A total of 4.13" long, the Micro Hawk flies readily on Quest Micro Maxx engines. Don't let their size fool you, these flying model rockets can be great fun. This is especially the case when flying from a small field. Includes Kevlar shock cord, water-slide decals, and metallized streamer. The small size of the parts can make assembly a challenge. This toy rocket is not suited for younger modelers.
		$5.99

ASP Micro Sonda II B The Sonda II B sounding rocket first launched in the 70's and is still in use today. It was developed in Brazil. Flies on Quest MMX rocket engines and uses the included streamer for recovery. The finished model rocket is 5.38" long. Diameter: 0.282". Approximate weight : 0.11 oz. Lots of fun when flying on smaller fields. Keep your eyes on this one, the Micro Sonda II B jumps off the launch pad for exciting flights.
	$4.99