Fliskits Richter Recker Looking for something big? Really big? The Richter Recker is over 7 feet tall (92.2" tall, 2.217" diameter). It comes with two 24" parachutes for safe recovery. A true crowd-pleaser with its slow, impressive liftoffs. This model rocket kit features a balsa nose cone and 3 24mm motor mounts. The fin pattern makes cutting the balsa fins easier. The detailed instructions help guide you through this skill level 3 cluster rocket kit. The Fliskits Richter Recker can be flown on a number of (three matching) motors : C11-3, D12-5, E9-6, D15-6, E15-7. If you do fly it on 3 x E9-6, you'll need to notify the FAA. Or, just fly it from a club launch with an FAA waiver and be in full compliance.
	$42.95

The Launch Pad Pershing MGM-31A Yes, bigger is better! This beast has an impressive 3.75" diameter body tube and is well over 3 feet tall (39.75"). While the Pershing may be a huge model rocket, it still flies happily on E and F motors. Recommended engines: Aerotech E30-4, E18-4, or try an F24-24 for serious fun. If you have a launch rod that is at least 4 foot long, you can also use the E15-4, but don't try it on a windy day. This tactical battlefield missile is 1/10.533 scale and recovers on a mylar parachute (included with kit). Decals not included. The Pershing is sure to attract attention at any launch and offers slow, realistic, takeoffs.
	$41.99

		Madcow Rocketry Phoenix A wonderful, classic military scale model, ready for mid-power rocketry fun and excitement. The Phoenix stands 22 inches tall, and has a 2.2" airframe diameter. It weighs 10oz. This model rocket kits includes all of the usual high-quality Madcow Rocketry parts, including Vinyl decals. Complete with 29mm motor mount assembly. Have some fun with these single use motors : D12-3, E9-4, F20W-7, F50T-6. Or, show off the Madcow Phoenix one of these 29mm RMS reloads : E16W-4, E23T-6, F40W-7.
		$39.95

Madcow Rocketry Mozzie A beautiful short, stubby rocket that can be flown on D to F motors with a 29mm motor mount. This gives fliers a wide range of altitudes from 300 to roughly 1,600 ft. This excellent sport flier measures 19.5" tall with a 2.6" diameter. It weighs in around 10 oz. Recommended motors for the Mozzie include the Estes D12 and Aerotech E16W-4, F21W-6, E23T-5, F20W-7, F22J-4, F25W-6, F40W-7, F26J-9, G33J-5, G38J-7.
	$39.95

		Madcow Rocketry Batray With it's cool fin design, the Madcow Batray will stand out at just about any launch. This high-quality model rocket has a length of 26" with a 2.2" diameter. Manufacturer listed weight is 8oz. If the cool bat fins aren't enough to add this one to your fleet, consider the laser-cut parts, heavy-duty body tube, vinyl decal and more. The Batray performs on a selection of 24mm (adapter required) and 29mm motors. Single use Estes D12-5 and E9-4, Aerotech E15-7, F20W-7. RMS reloads : E16W-7, E23T-6, F22J-7, and F40W-7.
		$39.95

The Launch Pad AMRAAM AIM-120A Another excellent TLP scale military model rocket kit. The AMRAAM AIM-120A is a large, clustered, mid-powered kit measuring 54 1/8" tall with a 2.6" airframe. This large skill level 3 rocket flies on a cluster of two D12-5 or two E15-7 engines. The Advanced Medium Range Air-to-Air Missile was developed to replace the Sparrow system to provide more a effective medium-range air combat system. Complete with Mylar chute for recovery. Note that decals shown on the AMRAAM are not included.
	$35.99

		The Launch Pad Exocet MM.40 Looking at the Exocet makes you wonder why these are called toy rockets. This tall missile measures 42" from nose to tail and has BT80 body tubes (2.6" diameter). The real Exocet MM.40 missile flies just above the waterline and scans for possible targets. Once it finds a victim, it strikes near the waterline where it can do most damage, or even sink the enemy ship. Watch the Exocet go for the skies on a cluster of two Estes D12-5, or D12-7 model rocket engines. Or, if you need more power, try a cluster of two composite Aerotech E15-7 motors. A cluster of two motors means cool flights with twice as much smoke and flame. This can only be a good thing.
		$34.99

Fliskits US TOG With cool details like ram jets (complete with intakes), it's no wonder this futuristic model rocket is a Fliskits favorite. Is the US TOG a time-traveling craft from the future or would you find alien explorers on-board? Build one and decide for yourself! This 34.77" tall, skill level 3, rocket has a 24mm motor mount, ready for either a C11-3 or a D12-5. It has an impressive 11.5" fin span with a 1.637" diameter airframe. Quality parts, such as : balsa nose cone, balsa transition & fin stock sheet, Kevlar® shock cord.
	$33.95

		The Launch Pad Alarm This mid-power model rocket kit is a scale replica of the original prototype version of the British Alarm. It's name is short for Air-Launched-Anti-Radar Missile. It is launched from aircraft such as the RAF Tornado GR4. When launched, the real Alarm climbs to an altitude of around 13 km. It then deploys a parachute and waits for a radar target. As soon as it detects one, the Alarms engages its target at great speed. This large skill level 3 kit measures 44.5" long with a 2.6" airframe diameter. It flies on both Estes & Aerotech model rocket motors : D12-3, E15-4, E18-4, E30-7, F24-4.
		$32.99

The Launch Pad Sparrow AIM 7-F If you like tall model rocket kits, the Sparrow AIM 7-F might just be the next addition to your collection. This flying toy rocket is an impressive 46.75" tall and has a 2.6" diameter. This skill level 3 kit brings us another big, military scale rocket from The Launch Pad. Decals shown not included. The TLP Sparrow features lots of details, such as tail cone, wiring tunnel, and brackets for added realism. This almost four foot tall rocket uses parachute recovery for soft landings. The Sparrow AIM 7-F performs best on these 24mm motors : Estes D12-3, Aerotech RMS E15-4, E18-4, E30-7, F24-4.
	$31.99

		The Launch Pad Hawk MIM-23A This classic scale model has a 2.6" wide airframe and stretches 37" tall. As a mid-power kit, this military beast performs best on D12-3 and F24-4 motors. It is a skill level three kit. The original Homing All the Way Killer destroyed low-flying enemies in flight. While the US never deployed the Hawk, it served many foreign nations well. The 23A was eventually replaced by improved series. With a price tag of $250,000 for the real missile, this scale rocket is cheap by comparison. The decals/markings show in the image are not included. The kits does include parts needed to build the model, and a parachute for recovery.
		$31.99

The Launch Pad Harpoon AGM-84A Another beautiful military scale model rocket from The Launch Pad. The Harpoon can be flown with D to F motors, depending on how much excitement you can handle that day. Recommended engines: Estes D12-3, Aerotech E15-4, E18-4, and F24-4. This missile flies close to the waterline to avoid radar. Once it finds a target ship, it jumps up and dives right into the enemy vessel. The completed model is 29.25" tall with a 2.6" body tube diameter (BT80). Decals not included. The Harpoon AGM-84A is a great way to get started with mid-power rocketry.
	$29.99

		The Launch Pad Standard AGM-78 Anti-Radar Missile The Standard model rocket is the 1/5.2 scale version of an air-launched missile used by the U.S. Navy. The unique fin profile makes it stand out at any club launch or other rocketry event. This Launch Pad model is a skill level three kit. The Standard AGM-78 mid-power rocket is 34.6" long with a diameter measuring 2.6". The TLP Standard AGM-78 provides slow, realistic liftoffs and exciting flights on Estes D12-3, D12-5 or Aerotech E15-7 and F24-4 model rocket motors.
		$28.99

Squirrel Works Dogfight Feast your eyes on this tall, high-quality, boost glider kit with dual gliders. That's right, two gliders means twice the fun per flight! The gliders are attached to the rocket at liftoff. Next, start the countdown and enjoy the nice, slow, boost. Watch the gliders detach and fight it out in the sky. The Dogfight model rocket measures 22.5" long, with a 1.325" airframe diameter. Weight listed on the large and colorful face-card is 3.4 oz. Squirrel Works recommends the following motors for the Dogfight rocket kit : B4-2, B6-2, C6-3, and C6-5. That's an excellent selection to put on an aerial display at different altitudes. The higher the rocket goes, the longer the gliders battle it out on the way down. Buy a Dogfight kit and buy quality, it's that simple. Each kit includes eight sheets of pre-cut balsa parts, a balsa nose cone, elastic shock cord with Kevlar anchor. Easy-to-follow instructions help make the building experience enjoyable. Six sheets of color decals help finish the model.
	$28.95

		The Launch Pad SAAB 372 (RB 72) Air-to-Air Missile The SAAB 372 was never put into operational service. Luckily, we can still enjoy building and flying this excellent TLP scale model. It performs well on D12-3, E15-4 and F24-4 24mm model rocket engines. A whopping 39" long, this scale missile has a 2.6" diameter. This makes it a nice-sized mid-power model rocket. The SAAB is a skill level 3 kit. Decal shown in image not included with kit.
		$27.99

The Launch Pad Sidewinder AIM-9L Air-to-Air Missile The Sidewinder AIM-9L is the popular missile used with great success by the U.S. military in a variety of locations. This Launch Pad scale missile replica includes fine details such as air-driven rollerons on the fins. This 36" long model rocket operates on D12-3 and D12-5 motors. The Siderwinder's diameter is 1.6" (BT60). The included 18" Mylar parachute helps bring the Sidewinder back safely for the next launch. This is a skill level three military scale kit.
	$27.99

		The Launch Pad Phoenix AIM-54C Air-to-Air Missile The Phoenix air interceptor missile has a range of over 100 kilometers. The scale replica has more modest, yet still exciting, performance. Launch with any of the recommended Estes & Aerotech model rocket motors : D12-3, D12-5, E15-7, E18-7, & F24-7 (RMS). This is the large version of the TLP Phoenix model rocket kit. With a 2.6" diameter, the skill level 3 model is 27" long. Note : decals shown not included with kit.
		$27.99

The Launch Pad Bullpup AGM-12B This missile was used to destroy bunkers and other ground structures before sending in the troops. Its easy-to-recognize shape make the Bullpup AGM-12B a favorite among scale modelers. The steering pivots and boat tail give it realistic detail. Decals shown are not part of the kit, modelers make their own. This is true for all TLP kits. This scale model rocket measures 27.25" long and has a 2.6" airframe diameter. Skill level 3 kit. The Bullpup flies on Estes D12-3, D12-3 and Aerotech RMS E18-4 and F24-4 model rocket motors.
	$27.99

		Fliskits Tres A two engine cluster isn't enough for you? No problem, check out this 3 engine cluster beauty. To fly this model rocket, simply select three matching motors, either 3 x B6-4, or for some serious craziness 3 x C6-5. Even with 3 x C6-5 motors, it doesn't fly super-fast, so you can enjoy the show and watch its impressive smoke trail. This skill level 3 kit comes complete with a parachute to recover the model safely and launch it again. The Tres measures an impressive 41.52" and has a 1.637" diameter.
		$27.95

Squirrel Works Nick Adams' Interstellar Probe The Interstellar Probe is the second of the Signature Series kits by The Squirrel Works. This kit was designed by Nick Adams, known for his interesting and stylish designs. This single stage rocket reminds us of the exotic Estes Mars Snooper kit, which is no longer in production. Launched in the distant past, the Interstellar Probe's mission is to explore, catalog and report back to its masters. Get your own today and send it out to explore. As a skill level 3 kit, the Interstellar Probe is intended for experienced modelers. There are lots of smaller parts to keep builders busy. There are 30+ laser-cut balsa parts, and 3 paper transitions, in this model rocket kit. Don't let this scare you, the detailed instructions make up for complexity and will guide you through the assembly process. The nose cone included with the kit is balsa. Also includes waterslide color decals and Mylar parachute for recovery. The fully assembled Squirrel Works kit stands 24.25" tall, has a 0.976" airframe diameter, and a listed weight of 1.9 oz. Nick Adams' Interstellar Probe likes to explore distant galaxies on these rocket motors : Estes A8-3, B4-4, B6-4, and for those super-exiting missions, the C6-5. Get one today, send it on an intergalactic exploration mission, and help catalog the universe, one sector at a time.
	$26.95

		Dr Zooch Rockets Return To Flight Space Shuttle The Space Shuttle orbiter is an actual glider which makes for really cool flights. The rocket flies up, and releases the orbiter at apogee. Watch it glide down while the rocket recovers with its own parachute. The Space Shuttle is roughly 10" tall, the orbiter measures about 7" long. Recommended for builders with average and above experience levels. Kit includes removable flight fins.
		$26.95

The Launch Pad Indigo S.A.M. The actual Indigo Surface-to-Air Missile has a range of about 6.25 miles. This mid-power scale model provides more modest flights with any of these recommended motors : D12-3, E15-4, E30-7, F24-4. This completed TLP model rocket kit stands 44.25" tall. The BT-80 body tubes give it a 2.6" diameter. The Indigo is a skill level three military scale (1/2.95) kit with such details as : tail cone, fin-tip receiver aerials & body wiring tunnels.
	$25.99

		Sunward Flying Umbrella This Sunward model rocket offers a great way to fly D12-3 motors on a small field. It won't wander too far and stays close to the launch pad. This cool high-drag vehicle stands over 14" tall and is more than 13" wide. It recovers with a parachute. The balsa pieces for this skill level 3 kit are all laser-cut. Pick up a Flying Umbrella and turn some heads are your next launch!
		$25.95

Squirrel Works Doug Sams' Tuber As part of the Squirrel Works Signature series, the unique style of this kit makes the Tuber stand out. The Doug Sams' Tuber is a two-stage rocket with tube fins on the sustainer section. The booster stage flies on a D12-0 and the sustainer can be flown on any of these Estes rocket engines : C11-5, D12-5, and D12-7. While this kit may seem difficult to build, don't let is scare you. The tube fins are pre-cut and come with a guide to attach them properly. The six (6) balsa fins are laser-cut. Included instructions are easy-to-follow. The booster stage uses tumble recovery. Two mylar streamers are included for sustainer stage recovery. This kit includes decals to help finish it. The assembled hobby rocket measures 23.375" long, and has a 1.325" airframe diameter. In short, the Doug Sams' Tuber is an excellent multi-stage rocket kit with a 24mm motor mount in both sections.
	$25.95

		The Launch Pad Maverick AGM-65B Air-to-Ground Missile The Maverick AGM-65B is a scale model of the air-launched tactical missile. The real deal attacks small targets with a high-explosive charge for optimal effectiveness. This TLP model flies on a selection of 24mm mid-power rocket motors : D12-3, D12-5, E15-4, F24-7. When fully assembled, the Maverick kit is 21.5" long with a 2.6" airframe diameter. Skill level 3 model rocket.
		$23.99

Fliskits Saturn 1B 1:282 This is a 1:282 peanut scale model kit of the infamous Saturn 1B NASA vehicle. The NASA vehicle was used to test parts of the Apollo moon mission in the 60's. The finished Saturn 1B model is 9.316" tall and has a 0.976" diameter. It offers excellent levels of detail, often not seen in larger models. This scale model rocket kit has a unique feature. It lets you, the builder, decide what skill level the kit is. You can build it as a skill level 3 kit. If you need more of a challenge, you can make it a skill level 4, or even level 5 model. The instructions are written in a way that allows the modeler to set the skill level for this model rocket kit. You're in control. Recommended engines : 1/2A3-4T, A3-4T, A10-3T. These are the popular 13mm motors which enable the Fliskits Saturn 1B kit to enjoy many, cheap, flights. This Fliskits rocket kit includes a parachute, and silk-screened decals. While the kit includes a launch lug, the rocket can also be flown with a pop lug or piston launcher (neither are included). This is the same design that was used by Jay Marsh to secure a first place at the national NARAM rocketry event in the 90's.
	$23.95

		Fliskits Thunderbird This is a flying sport scale model of the Thunderbird anti-aircraft missile. It is approximately 1:14 scale, it is not an exact replica. The real missile was created by the British Army and was nicknamed the Bloodhound System. It was in use from the late 50's to the mid 70's. It was known to be a highly accurate and lethal weapons system. This rocket kit includes balsa fin stock with fin templates, and paterns to form the booster nose cones from paper. This Flis rocket kit is intended for more experienced modelers. The finished Fliskits Thunderbird is 27.48" tall and has a 1.637" diameter. Fin span is an impressive 7.62". Listed weight is 1.9 oz. Parachute include for safe recovery. Model rocket engines to use with this kit are : Estes B6-4 and Estes C6-5.
		$23.95

Dr Zooch Rockets Soyuz Proudly made in the USA, this model rocket kit is a scale replica of the Russian Soyuz spacecraft. The Dr Zooch Soyus kit comes with lots of little pieces to give it an excellent level of detail and realism. The finished Soviet model is a touch over 18" tall and weighs around 2.2oz. It flies on 18mm Estes or Quest A, B, and C model rocket engines. The Soyuz rocket kit includes a parachute for recovery.
	$23.95

		Dr Zooch Rockets Saturn V Lots of fun details to work with on the Saturn V kit, such as the fairings, engine nozzles, cable tunnels, ullage motors, and transitions. The Saturn V model rocket kit includes color decals to make it come to life. Fully assembled, it stands about 18" tall. This hobby rocket has a 18mm motor mount and can be flown on Estes or Quest A, B or C motors. A parachute is included to return the Saturn V to ground control.
		$23.95

Dr Zooch Rockets Saturn IB The Saturn IB includes lots of details, such as the full tanks, H1 engines, nozzle assembly, Apollo module, and escape tower. This Dr Zooch kit measures 17" tall when finished. The Saturn IB scale model has a 18mm motor mount, for B or C rocket engines. A parachute is included to help with safe returns to the launch site.
	$23.95

		Dr Zooch Rockets Ares I-X The Ares I-X is one of the latest additions to the Dr Zooch family of scale space models. This is a scale model of NASA's test vehicle for a series of next-generation manned space vehicles. The finished model stand a little over 19" tall and weighs around 1.5 oz. The Dr Zooch Arex I-X flies on Estes-style B and C model rocket engines. Flights over 2,000 feet are possible. A plastic parachute is included for recovery. The yellow flames seen in the picture are actually fins which are needed for stable flight.
		$23.95

Dr Zooch Rockets Ares I Also known as "The Stick", the Ares I is a scale model of NASA's next-generation crew launch vehicle. This model is a good choice for a first Dr Zooch space program scale kit. The finished Ares I stands 19.5" tall. This model rocket kit includes printed wraps which minimize the amount of painting needed to make it look great. Build one of these manned spacecraft today and get it in the air before NASA gets a chance to fly theirs.
	$23.95

		Sunward Galactic Wave This galactic warrior is always on patrol and comes fully armed with laser cannons, ready for battle if needed. Recommended engines are the B6-2 for the maiden flight and C6-3 for more daring missions. This skill level 3 kit comes with parts including quality laser-cut balsa fins, an 18" parachute, rubber shock cord, silkscreen decals, and illustrated instructions in both English and French. When finished, the model boasts 22" in length, and has a 9" wingspan. The rocket's airframe diameter is 1.346". Build your own and send the Galatic Wave out on patrol at your next launch!
		$21.95

Fliskits Corona-2 Advanced-looking two stage model rocket design. A whopping 43.0" long (0.976" diameter). The package deal shown for sale here includes both booster and sustainer rocket stages. The impressive length of this skill level 3 kit increases stability for fantastic, extreme altitude flights. For the booster stage, a B6-0 or C6-0 can be used. For the sustainer, recommended model rocket motors are : A8-5, B6-6, and C6-7. The included parachute brings the Corona-2 back safely. Laser cut fins, detailed instructions, and the usual Fliskits quality parts make this a great kit. Can be flown in two stage or single stage configuration.
	$20.95

		The Launch Pad Perseus Surface-to-Air Missile This flying model rocket kit is a The Launch Pad original design. It is not a scale model of an existing military device. If it were real, the Perseus would probably be an interceptor capable of taking down enemy aircraft or even inbound missiles. Recommended rocket engines for the Perseus are the D12-5 and D12-7. The rocket is 26.25" long (1.6" diameter). The "U.S. Navy" decal/lettering shown in the image is not included with this skill level 3 kit.
		$18.99

Fliskits Rose-A-Roc Based on the original design of Art Rose, this rocket can be used for 18mm helicopter duration competitions. Fliskits says this about the Rose-A-Roc : "One of the best HD models in the industry!". This model rocket measures 20.54" long and its diameter is 0.736". Quite the versatile flier, it performs well on these model rocket motors : 1/2A6-2, A8-3, B4-2, B6-4, and C6-5. Looking for something different? Give this model a try!
	$18.95

		Starlight S.S. Barracuda This new Starlight rocketry kit is a fierce intergalactic space pirate. It hides in the emptiness of space, waiting to board and plunder any craft that crosses its path. Fly this space-worthy ship on an A8-3, B6-4 or a C6-5. She be 25" tall and 1.64" round, she be. The futurisctic S.S. Barracuda is outfitted with parachute and decals. Heave-To, Matey. Pick one up today, or these pirates may just have ye walk the plank!
		$16.95

Fliskits Deuce's Wild! One of the more popular Fliskits kits. If you've ever seen this model rocket fly, you already know why. It sports a two engine cluster design. The dual canted motor mounts make for an exciting and unique smoke trail. The Deuce's Wild! can be flown on two A8-3, or B6-4 motors. If you have a large enough launch field, go all out with 2 C6-5 motors. This is a skill level 3 kit and offers a great way to get into clustering. Parachute recovery. The Deuce's Wild stands 21.2" tall with a 1.637" diameter.
	$16.95

		Fliskits Stingray Even after numerous sightings, this remains a most mysterious craft. Are they warriors, or peaceful explorers? Nobody knows... Why not build one and decide for yourself? This futuristic, skill level 3, vessel features a 0.976" diameter with a length of 14.4". When going on missions, the Stingray prefers to be equipped with one of these model rocket motors : A8-3, B4-2, B6-4, and C6-5.
		$14.95

Starlight Seiron 3 Get ready for some 3 engine clustering fun! That's right, the Seiron 3 flies on not 1, not 2, but 3 engines at once. For exciting clustering action, use three matching rocket motors : A6-4, A8-3, B6-6, & C6-7. This one really soars on 3 C6-7 engines. The rocket is over two foot tall (26.25"). Maximum airframe diameter : 1.65". Kit includes balsa nose cone, 3 pre-cut fins, parachute assembly, decals, and a balsa transition.
	$13.95

		Starlight F-32 Avenger Futuristic spacecraft with sci-fi style design from the year 2078. Ready to defend our planet from alien invaders, the F-32 Avenger flies on A8-3, B6-4, or C6-5 rocket engines. Complete with laser cannons, this model rocket looks like a champ on the launch pad. Components include balsa fins and canards, decals, instructions, 12" parachute, and more. Fully assembled model is 14.75" long with a 1" body tube diameter.
		$12.95

Starlight Sky Master Take a closer look a this sleek, two-stage, model rocket. A full 28.00" long, with a 1" diameter, the Sky Master is ready for some high-altitude flights. The rocket recovers on a parachute (12"), and comes complete with 6 balsa fins and decals. Recommended engines for the first stage are B6-0 and C6-0. For the second stage, either a A8-5, B6-6, or a C6-7 will do the trick.
	$11.95

Fliskits Micro Maxx Interloper The many details make this futuristic intelligence gathering craft a pleasure to build and fly. Complete model rocket kit with laser cut fiber ram-jet fins, mylar streamer, water-slide decals, and wooden nose cone. Just over 6" long, 2.03" finspan. The Fliskits interloper is a skill level 2.5 kit, intended for modelers with Micro Maxx experience. Recommended motor : Quest Aerospace MMX II
	$8.45