Madcow Rocketry Phoenix A wonderful, classic military scale model, ready for mid-power rocketry fun and excitement. The Phoenix stands 22 inches tall, and has a 2.2" airframe diameter. It weighs 10oz. This model rocket kits includes all of the usual high-quality Madcow Rocketry parts, including Vinyl decals. Complete with 29mm motor mount assembly. Have some fun with these single use motors : D12-3, E9-4, F20W-7, F50T-6. Or, show off the Madcow Phoenix one of these 29mm RMS reloads : E16W-4, E23T-6, F40W-7.
		$39.95

Madcow Rocketry Mozzie A beautiful short, stubby rocket that can be flown on D to F motors with a 29mm motor mount. This gives fliers a wide range of altitudes from 300 to roughly 1,600 ft. This excellent sport flier measures 19.5" tall with a 2.6" diameter. It weighs in around 10 oz. Recommended motors for the Mozzie include the Estes D12 and Aerotech E16W-4, F21W-6, E23T-5, F20W-7, F22J-4, F25W-6, F40W-7, F26J-9, G33J-5, G38J-7.
	$39.95

		Madcow Rocketry Batray With it's cool fin design, the Madcow Batray will stand out at just about any launch. This high-quality model rocket has a length of 26" with a 2.2" diameter. Manufacturer listed weight is 8oz. If the cool bat fins aren't enough to add this one to your fleet, consider the laser-cut parts, heavy-duty body tube, vinyl decal and more. The Batray performs on a selection of 24mm (adapter required) and 29mm motors. Single use Estes D12-5 and E9-4, Aerotech E15-7, F20W-7. RMS reloads : E16W-7, E23T-6, F22J-7, and F40W-7.
		$39.95

The Launch Pad AMRAAM AIM-120A Another excellent TLP scale military model rocket kit. The AMRAAM AIM-120A is a large, clustered, mid-powered kit measuring 54 1/8" tall with a 2.6" airframe. This large skill level 3 rocket flies on a cluster of two D12-5 or two E15-7 engines. The Advanced Medium Range Air-to-Air Missile was developed to replace the Sparrow system to provide more a effective medium-range air combat system. Complete with Mylar chute for recovery. Note that decals shown on the AMRAAM are not included.
	$35.99

		The Launch Pad Scimitar This large model rocket is not based on an actual missile. The Scimitar is a skill level 4 kit for experienced modelers. The Scimitar flies on a cluster of two 24mm motors. Pick either a pair of D12-5, D12-7 or E15-7 motors for fun and excitement. The finished model is 39.25" tall with a 2.6" airframe diameter. Recovers on a 18" Mylar parachute.
		$34.99

The Launch Pad Exocet MM.40 Looking at the Exocet makes you wonder why these are called toy rockets. This tall missile measures 42" from nose to tail and has BT80 body tubes (2.6" diameter). The real Exocet MM.40 missile flies just above the waterline and scans for possible targets. Once it finds a victim, it strikes near the waterline where it can do most damage, or even sink the enemy ship. Watch the Exocet go for the skies on a cluster of two Estes D12-5, or D12-7 model rocket engines. Or, if you need more power, try a cluster of two composite Aerotech E15-7 motors. A cluster of two motors means cool flights with twice as much smoke and flame. This can only be a good thing.
	$34.99

		Fliskits Decim8 This futuristic battle cruiser is a new addition to the Fliskits product line for sale here. The Decim8 model rocket is listed as skill level 4. It has lots of features that modelers will appreciate and enjoy, such as 11 fins, 6 cut body tubes, gun booms with pods, waterslide decals, and other exciting details. Always ready for action, the Decim8 battle cruiser measures 38.1" long with a 10.4" fin span. Airframe diameter is 0.976", manufacturer listed weight is 2.5 oz. If you enjoy building hobby rockets with futuristic designs and lots of details, make the Decim8 your next rocketry project. The motor mount style is quite unique and makes it obvious the Fliskits Decim8 can reach any destination in no time. Depart on a military mission into deep space using one of these recommended engines : B4-2, B6-2, and C6-3. Parachute included.
		$34.95

Fliskits US TOG With cool details like ram jets (complete with intakes), it's no wonder this futuristic model rocket is a Fliskits favorite. Is the US TOG a time-traveling craft from the future or would you find alien explorers on-board? Build one and decide for yourself! This 34.77" tall, skill level 3, rocket has a 24mm motor mount, ready for either a C11-3 or a D12-5. It has an impressive 11.5" fin span with a 1.637" diameter airframe. Quality parts, such as : balsa nose cone, balsa transition & fin stock sheet, Kevlar® shock cord.
	$33.95

		The Launch Pad Alarm This mid-power model rocket kit is a scale replica of the original prototype version of the British Alarm. It's name is short for Air-Launched-Anti-Radar Missile. It is launched from aircraft such as the RAF Tornado GR4. When launched, the real Alarm climbs to an altitude of around 13 km. It then deploys a parachute and waits for a radar target. As soon as it detects one, the Alarms engages its target at great speed. This large skill level 3 kit measures 44.5" long with a 2.6" airframe diameter. It flies on both Estes & Aerotech model rocket motors : D12-3, E15-4, E18-4, E30-7, F24-4.
		$32.99

ASP Kappa-9M The Kappa series was a Japanese sounding rocket series. The first flight was in November 1962. The project developed into the Lambda and Mu satellite launchers. A big scale model rocket, the ASP Kappa-9M is over 3 1/2 feet long (43.25"). That should draw attention at just about any launch. Model diameter: 1.637". Weight : 4.06 oz. Scale is 1:10.1 The Kappa 9M model rocket requires a 3/16" launch rod and one of these engines : Estes C11-3, D12-5, E9-4, E9-6, or Aerotech composite E15-7 or E30-7. Includes parachute recovery device.
	$32.95

		The Launch Pad Sparrow AIM 7-F If you like tall model rocket kits, the Sparrow AIM 7-F might just be the next addition to your collection. This flying toy rocket is an impressive 46.75" tall and has a 2.6" diameter. This skill level 3 kit brings us another big, military scale rocket from The Launch Pad. Decals shown not included. The TLP Sparrow features lots of details, such as tail cone, wiring tunnel, and brackets for added realism. This almost four foot tall rocket uses parachute recovery for soft landings. The Sparrow AIM 7-F performs best on these 24mm motors : Estes D12-3, Aerotech RMS E15-4, E18-4, E30-7, F24-4.
		$31.99

The Launch Pad Hawk MIM-23A This classic scale model has a 2.6" wide airframe and stretches 37" tall. As a mid-power kit, this military beast performs best on D12-3 and F24-4 motors. It is a skill level three kit. The original Homing All the Way Killer destroyed low-flying enemies in flight. While the US never deployed the Hawk, it served many foreign nations well. The 23A was eventually replaced by improved series. With a price tag of $250,000 for the real missile, this scale rocket is cheap by comparison. The decals/markings show in the image are not included. The kits does include parts needed to build the model, and a parachute for recovery.
	$31.99

		The Launch Pad Harpoon AGM-84A Another beautiful military scale model rocket from The Launch Pad. The Harpoon can be flown with D to F motors, depending on how much excitement you can handle that day. Recommended engines: Estes D12-3, Aerotech E15-4, E18-4, and F24-4. This missile flies close to the waterline to avoid radar. Once it finds a target ship, it jumps up and dives right into the enemy vessel. The completed model is 29.25" tall with a 2.6" body tube diameter (BT80). Decals not included. The Harpoon AGM-84A is a great way to get started with mid-power rocketry.
		$29.99

The Launch Pad Standard AGM-78 Anti-Radar Missile The Standard model rocket is the 1/5.2 scale version of an air-launched missile used by the U.S. Navy. The unique fin profile makes it stand out at any club launch or other rocketry event. This Launch Pad model is a skill level three kit. The Standard AGM-78 mid-power rocket is 34.6" long with a diameter measuring 2.6". The TLP Standard AGM-78 provides slow, realistic liftoffs and exciting flights on Estes D12-3, D12-5 or Aerotech E15-7 and F24-4 model rocket motors.
	$28.99

		The Launch Pad Rapier S.A.M. This Rapier S.A.M. model kit is an amazing 1/2 scale replica. The actual missile, as used by the British armed forces, is 88" tall. The many details designed into the Rapier kit truly make this a beautiful military scale model rocket. This skill level 4 kit is intended for modelers who like to build large model rockets as well as launch them. You could also use the finished kit as a display model. Another tall model, the Rapier stands 44" tall (2.6" airframe diameter). TLP recommends these motors for flight : D12-3, E15-4, E30-7 & F24-4.
		$28.99

Squirrel Works Dogfight Feast your eyes on this tall, high-quality, boost glider kit with dual gliders. That's right, two gliders means twice the fun per flight! The gliders are attached to the rocket at liftoff. Next, start the countdown and enjoy the nice, slow, boost. Watch the gliders detach and fight it out in the sky. The Dogfight model rocket measures 22.5" long, with a 1.325" airframe diameter. Weight listed on the large and colorful face-card is 3.4 oz. Squirrel Works recommends the following motors for the Dogfight rocket kit : B4-2, B6-2, C6-3, and C6-5. That's an excellent selection to put on an aerial display at different altitudes. The higher the rocket goes, the longer the gliders battle it out on the way down. Buy a Dogfight kit and buy quality, it's that simple. Each kit includes eight sheets of pre-cut balsa parts, a balsa nose cone, elastic shock cord with Kevlar anchor. Easy-to-follow instructions help make the building experience enjoyable. Six sheets of color decals help finish the model.
	$28.95

		The Launch Pad SAAB 372 (RB 72) Air-to-Air Missile The SAAB 372 was never put into operational service. Luckily, we can still enjoy building and flying this excellent TLP scale model. It performs well on D12-3, E15-4 and F24-4 24mm model rocket engines. A whopping 39" long, this scale missile has a 2.6" diameter. This makes it a nice-sized mid-power model rocket. The SAAB is a skill level 3 kit. Decal shown in image not included with kit.
		$27.99

The Launch Pad Sidewinder AIM-9L Air-to-Air Missile The Sidewinder AIM-9L is the popular missile used with great success by the U.S. military in a variety of locations. This Launch Pad scale missile replica includes fine details such as air-driven rollerons on the fins. This 36" long model rocket operates on D12-3 and D12-5 motors. The Siderwinder's diameter is 1.6" (BT60). The included 18" Mylar parachute helps bring the Sidewinder back safely for the next launch. This is a skill level three military scale kit.
	$27.99

		The Launch Pad Phoenix AIM-54C Air-to-Air Missile The Phoenix air interceptor missile has a range of over 100 kilometers. The scale replica has more modest, yet still exciting, performance. Launch with any of the recommended Estes & Aerotech model rocket motors : D12-3, D12-5, E15-7, E18-7, & F24-7 (RMS). This is the large version of the TLP Phoenix model rocket kit. With a 2.6" diameter, the skill level 3 model is 27" long. Note : decals shown not included with kit.
		$27.99

The Launch Pad Hawk MIM-23B Surface-to-Air Missile The Launch Pad Hawk is a 1/5.45 scale model of the original missile once employed by the US military. The finished rocket can be used for mid-power launches or as a stationary display model. This skill level 4 kit is 38" long with a 2.6" diameter. Recommended model rocket motors for the TLP Hawk : D12-3, E30-7, F24-4. Please note that the decal shown in photograph is not included with the kit.
	$27.99

		The Launch Pad Bullpup AGM-12B This missile was used to destroy bunkers and other ground structures before sending in the troops. Its easy-to-recognize shape make the Bullpup AGM-12B a favorite among scale modelers. The steering pivots and boat tail give it realistic detail. Decals shown are not part of the kit, modelers make their own. This is true for all TLP kits. This scale model rocket measures 27.25" long and has a 2.6" airframe diameter. Skill level 3 kit. The Bullpup flies on Estes D12-3, D12-3 and Aerotech RMS E18-4 and F24-4 model rocket motors.
		$27.99

Fliskits Tres A two engine cluster isn't enough for you? No problem, check out this 3 engine cluster beauty. To fly this model rocket, simply select three matching motors, either 3 x B6-4, or for some serious craziness 3 x C6-5. Even with 3 x C6-5 motors, it doesn't fly super-fast, so you can enjoy the show and watch its impressive smoke trail. This skill level 3 kit comes complete with a parachute to recover the model safely and launch it again. The Tres measures an impressive 41.52" and has a 1.637" diameter.
	$27.95

		Squirrel Works Nick Adams' Interstellar Probe The Interstellar Probe is the second of the Signature Series kits by The Squirrel Works. This kit was designed by Nick Adams, known for his interesting and stylish designs. This single stage rocket reminds us of the exotic Estes Mars Snooper kit, which is no longer in production. Launched in the distant past, the Interstellar Probe's mission is to explore, catalog and report back to its masters. Get your own today and send it out to explore. As a skill level 3 kit, the Interstellar Probe is intended for experienced modelers. There are lots of smaller parts to keep builders busy. There are 30+ laser-cut balsa parts, and 3 paper transitions, in this model rocket kit. Don't let this scare you, the detailed instructions make up for complexity and will guide you through the assembly process. The nose cone included with the kit is balsa. Also includes waterslide color decals and Mylar parachute for recovery. The fully assembled Squirrel Works kit stands 24.25" tall, has a 0.976" airframe diameter, and a listed weight of 1.9 oz. Nick Adams' Interstellar Probe likes to explore distant galaxies on these rocket motors : Estes A8-3, B4-4, B6-4, and for those super-exiting missions, the C6-5. Get one today, send it on an intergalactic exploration mission, and help catalog the universe, one sector at a time.
		$26.95

Dr Zooch Rockets Return To Flight Space Shuttle The Space Shuttle orbiter is an actual glider which makes for really cool flights. The rocket flies up, and releases the orbiter at apogee. Watch it glide down while the rocket recovers with its own parachute. The Space Shuttle is roughly 10" tall, the orbiter measures about 7" long. Recommended for builders with average and above experience levels. Kit includes removable flight fins.
	$26.95

		The Launch Pad Indigo S.A.M. The actual Indigo Surface-to-Air Missile has a range of about 6.25 miles. This mid-power scale model provides more modest flights with any of these recommended motors : D12-3, E15-4, E30-7, F24-4. This completed TLP model rocket kit stands 44.25" tall. The BT-80 body tubes give it a 2.6" diameter. The Indigo is a skill level three military scale (1/2.95) kit with such details as : tail cone, fin-tip receiver aerials & body wiring tunnels.
		$25.99

Sunward Flying Umbrella This Sunward model rocket offers a great way to fly D12-3 motors on a small field. It won't wander too far and stays close to the launch pad. This cool high-drag vehicle stands over 14" tall and is more than 13" wide. It recovers with a parachute. The balsa pieces for this skill level 3 kit are all laser-cut. Pick up a Flying Umbrella and turn some heads are your next launch!
	$25.95

		Squirrel Works Doug Sams' Tuber As part of the Squirrel Works Signature series, the unique style of this kit makes the Tuber stand out. The Doug Sams' Tuber is a two-stage rocket with tube fins on the sustainer section. The booster stage flies on a D12-0 and the sustainer can be flown on any of these Estes rocket engines : C11-5, D12-5, and D12-7. While this kit may seem difficult to build, don't let is scare you. The tube fins are pre-cut and come with a guide to attach them properly. The six (6) balsa fins are laser-cut. Included instructions are easy-to-follow. The booster stage uses tumble recovery. Two mylar streamers are included for sustainer stage recovery. This kit includes decals to help finish it. The assembled hobby rocket measures 23.375" long, and has a 1.325" airframe diameter. In short, the Doug Sams' Tuber is an excellent multi-stage rocket kit with a 24mm motor mount in both sections.
		$25.95